Home › Flygt Spare Parts
Submersible & Drainage

Genuine Flygt
Spare Parts

Every component available. Every part genuine. Sourced by specialists who understand Flygt pumps from the inside — applications, tolerances, and critical performance requirements.

Request a Flygt Quote
Genuine Flygt submersible pumps and spare parts
Quote within 24 hours
Genuine parts only
Parts available 10–20 years after phase-out
20+ years Flygt ecosystem expertise
Parts Catalogue
What We Supply
Every component in a Flygt pump or mixer is available as a spare part through SpareFlows. All parts are genuine — developed and selected to work perfectly in Flygt products.
Flygt Griploc mechanical face seals
Griploc™ Mechanical Face Seals
Robust design with consistent performance and outstanding leakage prevention. Resistant to heat, wear and clogging. Griploc technology locks the seal securely to the shaft for reliable, tool-assisted mounting.
Sealing Systems
Flygt Plug-In seals
Plug-In Seals™
Two independent mechanical seals in a single ready-to-install unit. No special service tools required. Intelligent design protects sensitive sealing surfaces and springs from impurities during installation and operation.
Sealing Systems
Flygt stators
Flygt Stators
Optimal motor performance and increased pumping efficiency. Tolerance of high operating temperatures extends motor lifetime. Superior copper wire insulation minimises short-circuit risk and ensures reliable VFD operation.
Motor Components
Flygt shaft units
Flygt Shaft Units
Designed for reliable operation, maintaining balance during rotation and ensuring high, consistent motor efficiency. Made from durable, corrosion-resistant materials produced to the most precise manufacturing tolerances.
Rotating Assembly
Flygt SubCab cables
SubCab® Cables
Optimised for long-life submersible duty with extremely low water absorption, superior mechanical strength and resistance to high temperatures and chemicals. Tight tolerances ensure a reliable, leak-free fit with the cable entry sleeve.
Electrical
Flygt bearings
Bearings
Carefully selected from approved, well-known suppliers and thoroughly tested to Flygt-specific tolerances and clearances. Pre-greased for correct lubrication with unique part numbers that ensure the exact bearing for your model.
Mechanical
Flygt basic repair kits
Basic Repair Kits
All genuine Flygt parts needed for basic service in one box, at a lower cost than purchasing separately. Includes O-ring kits made to exacting tolerances. Simplifies handling and ensures nothing is missed during servicing.
Service Kits
Flygt N-Technology parts
N-Technology Parts
Continuous clog-free pumping for the toughest wastewater applications. Highly resistant materials and a self-cleaning impeller. Adaptive-N hydraulics deliver energy-saving performance through unique axial impeller movement.
Advanced Technology
Flygt wear kits and hydraulic repair kits
Wear Kits & Hydraulic Repair Kits
Quick and cost-effective dewatering pump repair combining wear part kits and hydraulic repair kits. Together they provide all parts needed for a complete hydraulic end repair. Add a basic repair kit for a full pump overhaul.
Service Kits
Why It Matters
Why Genuine Flygt Parts
Flygt pumps are precision machines. Every spare part is engineered to work within exact tolerances. Using non-genuine parts introduces risk — to performance, to warranty, and to operational continuity.
Engineered to Exact Tolerances
Genuine Flygt seals, impellers, and shaft units are manufactured to the same specifications as the original components. A fraction of a millimetre in shaft clearance or seal face flatness directly affects pump lifespan.
Long-Term Parts Availability
Genuine Flygt parts remain available 10 to 20 years after a model is phased out, depending on the product. This long-term commitment protects your investment and avoids costly pump replacements.
Warranty & Liability Protection
Non-genuine parts void the Flygt manufacturer warranty. When a failure occurs, the parts used are always the first point of investigation. Genuine parts protect your warranty rights and your liability position.
Lower Total Cost of Ownership
A genuine seal that lasts three times longer than a copy is not an additional cost — it is a saving. Factor in avoided downtime, reduced labour, and warranty coverage and the calculation is clear.

SpareFlows Expertise on Flygt

What 20+ years in the Flygt ecosystem means for your order

10–20
Years of parts availabilityGenuine Flygt parts remain in supply long after product phase-out — we know which models are still supported and how to source them.
100%
Genuine — alwaysWe do not stock or offer compatible alternatives. Every part supplied by SpareFlows is genuine Flygt, sourced through verified channels.
24H
Quotation turnaroundSend us the part number, pump model or nameplate photo. Standard parts are quoted within one business day. No back and forth — just a clear, accurate quote.
SCM
Supply chain expertiseWe know the full sourcing landscape — manufacturing origins, distribution channels, lead time drivers, and quality differentials across the Flygt supply chain.
Application Knowledge
Where Flygt Pumps Operate
Flygt submersible pumps and mixers operate in the most demanding environments. We understand the application context behind every part request — which affects which component is correct for your operating conditions.
Wastewater
Municipal and industrial wastewater stations. High solids content, corrosive media, demanding continuous duty cycles.
Drainage
Surface water drainage and flood control. Intermittent operation with variable flow conditions and stormwater management.
Industrial
Process water, cooling water and effluent handling in manufacturing environments. Chemical resistance is critical.
Mining
Dewatering of mines and quarries. Abrasive slurries, high hydrostatic pressure and extreme operating conditions.
Part Identification
How to Identify Your Flygt Part
Accurate part identification is the first step to a fast quotation. Here is what we need from you — and why each piece of information matters.
1
Find the pump nameplate
Every Flygt pump has a nameplate on the motor housing carrying the model number, serial number, and production year — all essential for correct part identification.
2
Note the part number
If you have the Flygt part number from a previous order or service report, provide it directly. This gives us the fastest and most accurate route to a quotation.
3
Send us a photo
Not sure of the part number? Send a clear photo of the nameplate and the part to replace. Our team will identify the correct reference and confirm it before quoting.
4
Add application context
Application type, media handled, and operating conditions help us confirm not just what part you need, but which exact variant is correct for your specific use case.
Models Covered
Flygt Models We Supply Parts For

Genuine OEM spare parts for the complete Flygt pump and mixer range — from legacy models to current production. Send us your model number for an immediate quotation.

2000 Series — Dewatering & Sludge
20002004200820712075212521402201-322201-0112201-592201-6922502290240026102620263026402660267027202730274027502830284028602870
3000 Series — Sewage & Wastewater
300030013045305730603068308030853102312631273152315331713201320232313240330033013306331233153351335634003501353136023800
N / P / NP Series & Concertor
N-pumpNP-pumpP-pumpConcertor NConcertor EAConcertor DPConcertor XPC
4000 Series — Mixers & Agitators
40004320435144104430444044504451446045304610462046304640465046604670467846804800485048604870
5000 Series — Heavy-Duty Slurry
500051005150551055205530554055505560557056305640565056605670
7000 Series — Axial Flow & Stormwater
7000702070307035704070617065708171017105712171257900
8000 Series — Stainless Steel
80008050805380568058

Ready to Request a Flygt Part?

Send us your part reference, pump model, or a nameplate photo.
We will reply with a genuine quotation within 24 hours.

Request a Quote by Email WhatsApp a Part Reference